|
 
CoreExpress®-ECO2
-
CoreExpress Module with
Intel® Atom™ E6xxT Processor - 0.6 ... 1.6 GHz
Especially designed for small, battery-powered computer systems, the CoreExpress-ECO2 features a powerful Intel Atom E6xxT processor (aka "Tunnelcreek"). The Computer on Module forms the kernel of a customized system, where the specialized carrier board handles all application specific interfaces. The module sports a CAN bus interface.LEMT condition management is available for condition monitoring.
A developer's kit is readily available.
Request the CoreExpress-Whitepaper!
CoreExpress-ECO2: Features
- Intel® Atom™ E6xxT Series Processor with low Thermal Design Power (TDP) specifications:
E620T, 600MHz, TDP = 2.7 Watt
E640T, 1.0GHz, TDP = 3.3 Watt
E660T, 1.3GHz, TDP = 3.3 Watt
E680T, 1.6GHz, TDP = 3.9 Watt
- Up to 2 Gbyte DDR2 RAM
- SDVO: 1920 x 1280 pixel
- LVDS: 1280 x 768 pixel
- LAN: RGMII interface
- 7 x USB 2.0 (1 slave)
- CAN 2.0B interface
- Passive cooling possible
- Supervision LEDs
- High Definition Audio (external codec)
- LEMT
- SDIO
- 2 SATA ports
- Supports Windows, Linux
CoreExpress-ECO2: Technical Data
| Technical Data |
| |
| Board Format |
CoreExpress,
58mm x 65mm |
Audio |
HDA link on CoreExpress connector
Codec on carrier required |
| |
| Processor |
Intel Atom E6xx Processor
E620T, E640T, E660T, E680T |
PCI Epxress Bus |
PCI Express bus 3 x1 lanes |
| |
| Chipset |
Intel® Platform Controller Hub EG20T
6x USB 2.0, 1x USB client, 2x SATA
1x Gigabit MAC: RGMII
1x SDIO, 1x CAN, SPI, I2C |
Power Supply |
+5 V only. All necessary voltages are generated on-board. |
| |
| RAM |
512MB, 1GB, 2GB DDR2 SDRAM,
667 / 800 MHz |
Power Consumption |
0.6GHz: 5.0W (approx.)
1.0GHz: 7.9W (max),
1.6GHz: 8.5W (approx.) |
| |
| Graphics |
Integrated Graphics Engine (SDVO, LVDS), Video Engine (H.264, H.263, MPEG2, MPEG4, VC1, WMV9)
integrated memory controller,
supports 3D, DirectX and OpenGL |
Power Management |
BIOS supports ACPI power saving modes |
| |
| SDVO |
up to 1920 x 1280 @85 Hz
Digital Display port for ADD2 card or SDVO-DVI transmitter on carrier board |
Status LED |
Status (Service)
S3 mode |
| |
| LVDS |
18/24 bit single channel
up to 1280 x 768 @60 Hz
Display backlight support |
Watchdog |
Yes (LEMT) |
| |
USB
|
• 6 USB 2.0 host ports with boot device support
• 1 USB 2.0 client |
Operating Temperature |
0°C…+60°C (commercial, all versions)
-20°C…+60°C (industrial, all versions)
-40°C…+85°C (extended, optional) |
| |
Ethernet
|
Controller integrated in chipset
PHY on carrier required |
Cooling |
Passive cooling possible
Heat spreader is available |
| |
SATA
|
2 SATA ports |
MTBF |
228,412 hours @ 25°C
|
| |
CAN
|
2.0B interface with up to 1Mbps
Transceiver on carrier required |
BIOS
|
Phoenix BIOS
BIOS parameters are saved in Flash
|
| |
SDIO
|
8 bit, integrated in chipset |
LEMT |
Yes, provides condition monitoring |
| |
|
|
Supported OS
|
Windows, Linux
|
| |
CoreExpress-ECO2: LEMT Functions
LEMT (LiPPERT Enhanced Management Technology) is LiPPERT's way of managing and supervising embedded PCs. It offers features like advanced watchdog handling, supervision counters, and non-volatile storage for asset handling. More details about the used techniques and implementation are availabe in the Knowledge Base section.
The CoreExpress-ECO2 implements these Functions:
| |
Function name |
Description |
| |
|
|
| |
Total operating hours counter |
Counts the number of hours the module has been run in minutes |
| |
On-time minutes counter |
Indicates the amount of time since last power on in minutes |
| |
Power cycles counter |
Counts how often the module has been powered on |
| |
Watchdog timer |
Set / Reset / Disable / Trigger Watchdog Timer |
| |
System restart reason |
Power loss / Watchdog / External Reset |
| |
Fail-safe-BIOS support |
In case of a boot failure, hardware signals tell external logic to boot from a Fail-Safe-BIOS |
| |
Flash area |
1024 bytes of Flash area for customer data |
| |
Protected flash area |
128 Bytes. Keys, ID’s, etc. can be stored in a write- and clear-protectable region |
| |
Board identity |
Vendor ID / board ID / serial number |
| |
Temperature Monitor |
Read the actual temperatures of the CPU and Board. Stores Temperatures at Power-up. |
| |
Temperature Logger |
Stores Min-/Max-Temperature of the CPU and Board |
| |
Backlight Control |
Enable, disable and control the brightness of the LVDS backlight |
| |
Power Consumption |
Read main current and power consumption |
| |
Data Logging |
Log fetched data for spreadsheet calculation programs |
CoreExpress-ECO2: Support / Sales
The table below lists only the standard models.
Other configurations are available for projects. Minimum order quantities apply.
| Ordering Information |
Order Number
|
Description
|
| 813-0012-10 |
CoreExpress module with Intel Atom E620T processor, 0.6GHz, 512MB DDR2 RAM. Industrial temperature range -20°C ... +60°C |
| 813-0013-10 |
CoreExpress module with Intel Atom E640T processor, 1.0GHz, 1GB DDR2 RAM. Industrial temperature range -20°C ... +60°C
|
| 813-0018-10 |
CoreExpress module with Intel Atom E680T processor, 1.6GHz, 2GB DDR2 RAM. Industrial temperature range -20°C ... +60°C |
| 913-0012-10 |
CoreExpress module with Intel Atom E620T processor, 0.6GHz, 512MB DDR2 RAM. Industrial temperature range -40°C ... +85°C |
| 913-0013-10 |
CoreExpress module with Intel Atom E640T processor, 1.0GHz, 1GB DDR2 RAM. Extended temperature range -40°C ... +85°C |
| 913-0018-10 |
CoreExpress module with Intel Atom E680T processor, 1.6GHz, 2GB DDR2 RAM. Industrial temperature range -40°C ... +85°C |
| 708-0012-10 |
Developer's Kit, CoreExpress®-ECO2, 1.0 GHz, operating temperature range 0°C to 60°C |
| 708-0012-11 |
Developer's Kit, CoreExpress®-ECO2, 1.6 GHz, operating temperature range 0°C to 60°C |
CoreExpress-ECO2: Downloads
| Documentation |
| Datasheet |
| Technical Manual |
| UEFI BIOS User's Manual |
| |
|
| Tools |
| LEMT Software Manual |
|
| LEMT Technical Manual |
|
|
For more tools and information click here to access the LEMT developer page.
|
|
| Drivers |
| Windows XP (x86) |
|
| Chipset (EG20T) |
|
| Graphics (EMGD) |
|
| Audio (to use with Carrier for CoreExpress Specification 2.1 Modules) |
|
| SATA (Windows XP floppy installation) |
|
| Howto install Windows XP by adding the SATA driver manually |
|
|
|
| Windows 7 (x86) |
|
| Chipset (EG20T) |
|
| Graphics (EMGD) |
|
| Audio (to use with Carrier for CoreExpress Specification 2.1 Modules) |
|
|
|
| Board Support Packages - available with the Developer's Kit |
|
| Windows Compact 7 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
|
| Windows Embedded Standard 7 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
|
| Ubuntu Linux 11.04 |
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
|
| BIOS |
| BIOS(Notes) CETC0002 (Release: 02 / 06 / 12) |
|
| |
BIOS Notes
We support our customers with BIOS binaries and all kinds of drivers for our embedded X86 boards. Usually, there's at least support for Windows and Linux. Some selected boards are also supported with drivers for real time operating systems.Check the table state above for the list of drivers and the current BIOS version. Please contact our
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
if the required driver is not listed on this web site.
BIOS loader
To burn the BIOS binary into your module's Flash PROM, there is a universal loader program available that works with most of our single bard computers. This tool requires DOS to run.
BIOS Modifications
You need a special function integrated in your embedded PC's BIOS? We can customize the standard BIOS to match exactly your requirements! Please
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
about the possibilities and a quote.
|
